Promise Store Dubai

Shopping Cart (0)

Close

No products in the cart.

Your cart is currently empty.
Output
Max Configurable Power (Watts) 800 K Watts / 1.0 KVA
UPS Type Double conversion Online
Input
Input Frequency 40 – 70 Hz
Input Voltage Range for Main Operations 110 – 285 Adjustable (half load), 160 – 280V
Other Input Voltages 220, 240
Batteries
Battery Type Lead-acid battery
Typical Recharge Time 4 hour(s)
Expected Battery Life (years) 3-5 years
Battery Charge Power (Watts) 30 W rated
Communication & Management
Control Panel Multifunction LCD
Interface Port(s) DB-9 RS-232, USB
Dimensions And Weight
Weight (metric) 24.0 kg
Product Dimensions (metric) 23.8 x 29.0 x 4 cm
General
Warranty 2 years repair or replace

APC Easy UPS Online SRV 1000VA 230V w/ Ext Battery Pack -SRV1KI

SRV1KI-APC Easy UPS On-Line SRV Ext. Runtime 1000VA 230V is high quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.

Batteries & Runtime

Run Time : View Runtime Graph
Efficiency : View Efficiency Graph

Operational Features

Serviceability

    • Disconnected battery notification: SRV1KI Warns when a battery is not available to provide backup power.
    • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    • Audible alarms: SRV1KI Provides notification of changing utility power and UPS power conditions
    • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.

Manageability

  • USB connectivity: Provides management of the UPS via a USB port (not available on all models).
  • Serial connectivity: SRV1KI  Provides management of the UPS via a serial port.
  • Network manageable: Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
  • LED status indicators: Provide easy-to-read status of the unit and utility power conditions.
  • LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • SmartSlot : Customize UPS capabilities with management cards.

APC Easy UPS On-Line standard features and applications :

Standard Models :
Built-in batteries for Plug-and-Play will provide a ~2 to 4 min typical battery backup power for the connected equipment at full load.
Extended-Run Models :
Extended-run models have the capability to add external battery packs to scale runtime from minutes to hours, making them ideal for mixed load applications.
UXI Models :
UXI series has the capability to add third-party external batteries to get longer runtime, providing flexibility when selecting batteries.

Safety and General Information

Deenergizing safety:

The UPS contains internal batteries and may present a shock hazard even when disconnected from the branch circuit (mains). Before installing or servicing the equipment check that the:

  • Input circuit breaker is in the OFF position.
  • Internal UPS batteries are removed.
  • XLBP battery modules are disconnected.
Electrical safety:

  • Use tools with insulated handles.
  • Do not handle any metallic connector before power has been disconnected.
  • For models with a hardwired input, the connection to the branch circuit (mains) must be performed by a qualified electrician.
  • The SRV1KI  protective earth conductor for the UPS carries the leakage current from the load devices (computer equipment). An insulated ground conductor is to be installed as part of the branch circuit that supplies the UPS. The conductor must have the same size and insulation material as the grounded and ungrounded branch circuit supply conductors. The SRV1KI  conductor will typically be green, with or without a yellow stripe.
  • Leakage current for a pluggable, Type A UPS may exceed 3.5 mA when a separate ground terminal is used.
  • The UPS SRV1KI  input ground conductor must be properly bonded to protective earth at the service panel.
  • If the UPS input power is supplied by a separately derived system, the ground conductor must be properly bonded at the supply transformer or motor generator set.
Battery safety :

  • Batteries typically last for two to five years. Environmental factors impact battery life. Elevated ambient temperatures,poor quality utility power, and frequent short duration discharges will shorten battery life. Batteries should be replaced before end of life.
  • Replace batteries immediately when the unit indicates battery replacement is necessary.
  • When replacing batteries, replace with the same number and type of batteries as originally installed in the equipment.
  • Schneider Electric uses Maintenance-Free sealed Lead Acid batteries. Under normal use and handling, there is no contact with the internal components of the battery. Over charging, over heating or other misuse of batteries can result in a discharge of battery electrolyte. Released electrolyte is toxic and may be harmful to the skin and eyes.
  • CAUTION: Before installing or replacing the batteries, remove jewelry such as chains, wristwatches and rings.Use tools with insulated handles. High short circuit current through conductive materials could cause severe burns.
  • CAUTION: Do not dispose of batteries in a fire. The batteries may explode
  • CAUTION: Do not open or mutilate batteries. Released material is harmful to the skin and eyes and may be toxic.

Reviews

There are no reviews yet.

Be the first to review “APC Easy UPS Online | 1000 VA | 230 V | SRV1KI”

Your email address will not be published. Required fields are marked *

Please login to post questions
x