Promise Store Dubai

Shopping Cart (0)

Close

No products in the cart.

Your cart is currently empty.
Output
Max Configurable Power (Watts) 6 k Watts / 6.0 kVA
UPS Type Double conversion online
Input
Other Input Voltages 220, 240
Batteries
Battery Type Lead-acid battery
Typical Recharge Time 3 hour(s)
Expected Battery Life (years) 3 – 5
Battery Charge Power (Watts) 239 W
Dimensions And Weight
Weight (metric) 55.9 kg
Product Dimensions (metric) 17.5 (H) x 44 (W) x 62 (D) cm
General
Warranty 3 years repair or replace (excluding battery) and 2 years for battery

Batteries & Runtime

Run Time : View Runtime Graph
Efficiency : View Runtime Graph

SRTG6KXLI APC Smart UPS RT | 6 kVA | 230V

This SRTG6KXLI APC Smart UPS RT is designed for IT professionals or network administrators to maintain business uptime and continuity. This 5kVA on-line rack/tower UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. It comes with hard wire 3-wire (1P+N+E) input, 2x IEC 320 C13 and 1x IEC 320 C19 outlets. The UPS has an embedded Network Management Card for UPS network-based monitoring and management.

The UPS comes with PowerChute Network Shutdown that provides a graceful shutdown of physical servers, virtual machines, and HCI clusters. The UPS can connect to Eco Structure IT or third-party centralized management platforms. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. The UPS is compatible with the SRTGRK1 rail kit sold separately.

Manageability

  • • Smart Slot: SRTG6KXLI APC Smart UPS RT Customize UPS capabilities with management cards.
  • • Infra Structure Manager Compatible: Enables centralized management via the APC Infra Structure Manager.
  • • LED status indicators: SRTG6KXLI APC Smart UPS RT Quickly understand unit and power status with visual indicators.
  • • Network manageable: Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
  • • Serial connectivity: SRTG6KXLI APC Smart UPS RT Provides management of the UPS via a serial port.

Protection

  • • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • • Input Power Factor Correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • • Resettable circuit breaker: SRTG6KXLI APC Smart UPS RT Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  • • Cold-start capable: Provides temporary battery power when the utility power is out.
  • • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.

Availability

  • • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • • Temperature-compensated battery charging: Prolong battery life by regulating the charge voltage according to battery temperature.
  • • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • • Scalable runtime: SRTG6KXLI APC Smart UPS RT Allows additional run time to be quickly added as needed.

Reviews

There are no reviews yet.

Be the first to review “APC Smart UPS RT | 6 kVA | 230V | SRTG6KXLI”

Your email address will not be published. Required fields are marked *

Please login to post questions
x